# A new touchscreen for an espresso machine.

> The interface of the H8 espresso machine, designed and rebuilt by Nuxsol: profiles, a live shot chart, a recipe editor and every setting, on the machine’s own 1024 × 600 screen.

- Sector: Product interface
- Year: 2026
- Project: Vellutto H8
- Client: Vellutto
- Interface design: Nuxsol
- Code and development: Nuxsol
- Services: Product design, Development

The H8 is a high-end espresso machine that Vellutto sells to home baristas across the EU and EEA. Its touchscreen decides how the machine feels to use every morning. Nuxsol designed a new interface for it and wrote the code that runs on the machine, without touching the software that controls the pump, the boilers and the valves.

## In the project

- Interface for the 1024 × 600 touchscreen
- Pro, Quick and Manual brewing screens
- Live shot chart and after-shot summary
- Recipe editor with stages
- Temperature, water tank, alarm and service screens
- Desktop preview rig
- Installable update package

## The problem

An espresso machine is used standing up, often before the first coffee of the day, with one hand free. The H8 has a 1024 × 600 touchscreen and a lot to say: two boiler temperatures, a scale, a water tank, pressure and flow profiles with several stages, and a full set of cleaning and service tasks. The factory interface showed most of it, but not in an order a barista could follow at a glance, and some of it was hard to reach.

There was one firm limit. The machine’s controller, the software that runs the pump, the boilers and the valves, had to stay exactly as it was. A new interface could change what the barista sees and touches, never what the machine does.

## What we built

We designed the interface around three ways of brewing. Quick is a grid of saved drinks. Pro shows the profiles, the plan for the selected shot and a live chart once it pours. Manual gives the barista the pump directly, with a fader for pressure or flow. A dock at the bottom keeps hot water, rinse, steam and the main button in the same place on every screen, and a status bar keeps the temperatures, the scale and the water level in view.

The recipe editor treats a profile as a row of stages. Each stage sets its own length, pressure or flow, temperature and pause, and can hold or ramp to the next. The temperature sheet, the water tank, alarms, eco mode, the screensaver, languages, the quick guide and the passcode-protected service pages were redrawn in the same system.

We wrote it in Qt QML, the toolkit the machine already runs, and bound it to the machine’s existing data and commands. A desktop rig renders the same compiled interface with a simulated machine, so each build was checked screen by screen before it went onto a USB stick and into the machine.

## Who it is for

- The home barista: Stands at the machine with a cup in one hand. Needs to start a shot, see how it runs and repeat a good one, from arm’s length.
- The barista who experiments: Changes pressure, flow and temperature stage by stage. Needs every number visible and adjustable without a menu dive.
- The owner and service: Needs cleaning, descaling, maintenance and machine settings in one place, behind a passcode where it matters.

## What we did

### Product design

Used: User interface, User experience, Design systems, Prototypes, Dashboards.

1. Map the tasks: Every action the barista and the service technician take, from the first shot of the day to descaling.
2. Design the screens: Pro, Quick, Manual, the editor and every overlay, drawn at the screen’s real size of 1024 × 600.
3. Build a component set: Buttons, steppers, sliders, switches, inputs and progress bars, in one dark palette with one amber signal.
4. Prototype in the browser: A clickable HTML prototype showed exactly how the screens would look on the machine before any code ran on it.

### Development

Used: Front-end, Qt and QML, Embedded Linux, Performance.

1. Rebuild the interface in QML: The prototype turned into Qt QML screens and shared widgets, bound to the machine’s existing data and commands.
2. Preview on a desktop: A preview rig renders the same compiled interface on a laptop, with a simulated machine, so every screen and state could be checked without installing it.
3. Package the update: The new interface goes into the machine’s own update package, installed from a USB stick like a factory update.
4. Install, test, repeat: Each build was installed on the machine, checked by the owner, and fixed before the next.

## Design decisions

1. One screen per way of brewing. Quick is a grid of saved drinks, one tap each. Pro shows the profiles, the plan and the live chart. Manual hands the pump to the barista with a fader. A switch at the top moves between them on every screen.
2. The dock never moves. Hot water, rinse, steam and the main button sit in the same place on every page. The main button changes with the moment: Start, Cancel, Test.
3. Read it from arm’s length. Brew and steam temperatures, scale weight and the water level sit in the status bar on every screen, set large. Labels stay small; numbers carry the weight.
4. Each line on the chart gets its own room. Pressure, pump flow, cup flow and weight are drawn on one time axis, each with its own colour and scale, so the values never print on top of each other.
5. Edit a profile where you see it. The pencil on the selected profile opens the editor for that profile. Stages are cards with their own length, pressure or flow, temperature and pause, and a preview chart redraws as they change. Before: In the factory interface the edit button could freeze the screen.
6. The controller stays untouched. The machine’s own control software, settings and safety logic were not changed. Only the interface was replaced, and every build was checked so that the interface is the only part that differs.

## How it works

1. Choose: Pick a profile from the rail on the left, or a saved drink in Quick.
2. Brew: Press Start. The chart draws pressure, flow and weight live, and shows the stage it is in.
3. Stop: The shot stops at the volume or weight the profile sets, or when Cancel is pressed.
4. Review: The after-shot card shows time, weight in the cup, water used, brew temperature and what stopped the shot.
5. Adjust: Open the profile, change a stage, press Test, and save when it pours right.

## The principle

Change what the barista sees. Leave what the machine does exactly as it was.

## What it is built to change

- Confirmed on the machine: Each build was installed on a real H8 and checked by the owner before the next one was made.
- Only the interface changes: Every update package was compared with the factory package: the control software is identical, only the interface differs.
